View unanswered posts | View active topics It is currently 19 Mar 2024, 11:08



Reply to topic  [ 10 posts ] 
Frågor från en som är grön på gammalt (Fender) 
Author Message

Joined: 07 Sep 2009, 13:27
Posts: 7737
Location: Göteborg
Post Frågor från en som är grön på gammalt (Fender)
När började Fender med de smala halsarna på strator?

Vilka årgångar har de bredaste halsarna på 60-talet?

Vilka årgångar är de grövsta?

Finns det gamla strator som är så breda som 42mm i halsen?


Jag vet att svaren finns bara man söker rätt men länka gärna till en bra sån sida. Gärna en med centimetermåttangivelse för jag blir väldigt osäker på om jag har fattat rätt när de skriver i tum.


22 Oct 2015, 12:29
Profile
User avatar

Joined: 27 Dec 2007, 16:14
Posts: 14754
Location:
Post Re: Frågor från en som är grön på gammalt (Fender)
Det är nog svårt att besvara, dom var ju 'all over the place', fanns inga speciella profiler specar och sånt på den tiden och dom gjordes ju för hand. Många är dessutom nedslipade i efterhand då det var populärt med 'slim necks' på 70 o 80-talet.

_________________



23 Oct 2015, 20:17
Profile ICQ WWW

Joined: 07 Sep 2009, 13:27
Posts: 7737
Location: Göteborg
Post Re: Frågor från en som är grön på gammalt (Fender)
Mike Leaf wrote:
Det är nog svårt att besvara, dom var ju 'all over the place', fanns inga speciella profiler specar och sånt på den tiden och dom gjordes ju för hand. Många är dessutom nedslipade i efterhand då det var populärt med 'slim necks' på 70 o 80-talet.


Nånstans läste jag att det efter nåt år (på 60-talet?) endast gjordes utanför standard som customorder.

Fattar också att en del måste vara nerslipade men nog inte så ofta på bredden va? Shredtrenden var ju inte så mycket smala halsar.


26 Oct 2015, 13:52
Profile

Joined: 05 Sep 2011, 07:49
Posts: 2740
Location: Kalmartrakten SWISH
Post Re: Frågor från en som är grön på gammalt (Fender)
Från A. R. Duchossoir The Fender Stratocaster

Nut width
"A" = 1 1/2" (1,500") 38,10 mm
"B" = 1 5/8" (1,625") 41,28 mm
"C" = 1 3/4" (1,750") 44,45 mm
"D" = 1 7/8" (1,875") 47,63 mm
(uppgifter från sid. 66)

Min egna konventering till millimeter. Själv har jag bara sett och hållt i "B"-halsar samt en "C"-hals. A, C och D är ovanligare än B (D sällsyntast).

sid. 46 - 50 innehåller trevlig läsning om halsarna. På sid. 50 står det just om halsprofiler (i stort sett samma som Mike redan skrivit).

_________________
granis, medlem sedan 2/1 2003, sedan 5/11 2011 som Granis67.

Religion vs fossils. Fossils win.


Last edited by Granis67 on 28 Oct 2015, 12:16, edited 1 time in total.



26 Oct 2015, 16:16
Profile

Joined: 10 Jul 2010, 21:54
Posts: 257
Location:
Post Re: Frågor från en som är grön på gammalt (Fender)
From http://guitarhq.com/fender.html


Neck Back Shapes (profiles), all guitar and bass models.
Fender neck shapes have changed through the years too.

1950 to 1955: Fender neck shapes (all models) have a standard large and chunky "D" profile (big "baseball bat" style neck).
1956: Fender necks change to a large and chunky "soft V" profile.
1957: the "V" shape gets much stronger. This 1957 "strong V" neck profile becomes famous, and musicians like Eric Clapton prefer its shape. Some Fender necks produced have a "small strong V", where the neck isn't so big feeling, but still has a very strong "V" shape (mostly seen on Musicmasters and Duosonics, and the occassional Strat).
1958: the neck profile completely changes, with the "V" shape completely gone. It's back to a conventional "D" neck profile, but not nearly as thick and large as 1955 and prior neck profiles. This neck style is used on most reissue Fenders (regardless of the year being copied).
1959 and later: the "D" profile gets yet a bit smaller and less chunky. With the release of rosewood fingerboards on all models in mid-1959, the "D" neck profiles pretty much stay the same throughout the 1960s with only minor variance from year to year (for example, 1962 necks seem to be a bit chunkier than 1959 to 1961 necks).
Neck Width.
From March 1962 to 1969, Fender marked their necks with an "official" neck width letter at the butt of the neck (in front of the date code). The "B" neck width is the normal width, as used on about 99% of all Fenders from this period. All other sizes were available by special order only. Also all pre-1962 Fender necks have a 1 5/8" nut width (though I'm sure there are some exceptions, but none I have seen).

A = 1 1/2" wide at the nut.
B = 1 5/8" wide at the nut (normal size).
C = 1 3/4" wide at the nut.
D = 1 7/8" wide at the nut.


27 Oct 2015, 23:47
Profile ICQ YIM WWW

Joined: 07 Sep 2009, 13:27
Posts: 7737
Location: Göteborg
Post Re: Frågor från en som är grön på gammalt (Fender)
Om jag ska tolka herrarna rätt så finns det inga Fender som är bredare än 42, förutom de som är jättebreda, dvs 44 och mer.

Fan.


28 Oct 2015, 13:11
Profile

Joined: 14 Oct 2015, 16:03
Posts: 141
Post Re: Frågor från en som är grön på gammalt (Fender)
Vinyljunkie wrote:
Om jag ska tolka herrarna rätt så finns det inga Fender som är bredare än 42, förutom de som är jättebreda, dvs 44 och mer.

Fan.

Varför behöver du en så bred hals över sadeln?
Jag tycker personligen att det viktigaste är vad halsen har för djup och formation. Alltså om den har en bred C hals, smal C hals, V hals osv.


29 Oct 2015, 00:43
Profile

Joined: 07 Sep 2009, 13:27
Posts: 7737
Location: Göteborg
Post Re: Frågor från en som är grön på gammalt (Fender)
Stratosphere wrote:
Vinyljunkie wrote:
Om jag ska tolka herrarna rätt så finns det inga Fender som är bredare än 42, förutom de som är jättebreda, dvs 44 och mer.

Fan.

Varför behöver du en så bred hals över sadeln?
Jag tycker personligen att det viktigaste är vad halsen har för djup och formation. Alltså om den har en bred C hals, smal C hals, V hals osv.


Personlig preferens.


29 Oct 2015, 13:07
Profile

Joined: 10 Jul 2010, 21:54
Posts: 257
Location:
Post Re: Frågor från en som är grön på gammalt (Fender)
Standard Fender er 1 10/16"
Gibson hadde 1 11/16" fram til mid '65,
da gikk de ned til 1 9/16".


29 Oct 2015, 14:20
Profile ICQ YIM WWW
User avatar

Joined: 28 Sep 2004, 13:36
Posts: 1786
Location: Uppsala
Post Re: Frågor från en som är grön på gammalt (Fender)
Vinyljunkie wrote:
Stratosphere wrote:
Varför behöver du en så bred hals över sadeln?
Jag tycker personligen att det viktigaste är vad halsen har för djup och formation. Alltså om den har en bred C hals, smal C hals, V hals osv.


Personlig preferens.


Dags att fynda bland Gibsons galna 2015-halsar. :mrgreen:


11 Nov 2015, 00:27
Profile
Display posts from previous:  Sort by  
Reply to topic   [ 10 posts ] 

Who is online

Users browsing this forum: No registered users and 11 guests


You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot post attachments in this forum

Search for:
Jump to:  
Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group.
Designed by ST Software.